Latest Cisco 350-030 Exam Questions From Flydumps Ensure 100 Percent Exam Pass

GOOD NEWS: You can free download 100% accurate Cisco https://www.leads4pass.com/350-030.html practice test for training on Flydumps.com.Flydumps is also an authenticated IT certifications site that offers all the new Cisco 350-030 questions and answers timely.Visit the site to get free Cisco 350-030 VCE and PDF.

Exam A QUESTION 1
When using an Inline-Power enabled Catalyst Switch, which pins are used to supply Inline-Power to an IP Phone?
A. Pins 1, 2, 3, and 6
B. Pins 1, 2, 5, and 6
C. Pins 2, 4, 6, and 8
D. Pins 3, 4, 7, and 8
E. Pins 4, 5, 7, and 8
Correct Answer: A QUESTION 2
When using a Cisco Inline-Power Patch-Panel, which pins are used to supply Inline-Power to the IP Phone?
A. Pins 1, 2, 3, and 6
B. Pins 1, 2, 5, and 6
C. Pins 2, 4, 6, and 8
D. Pins 3, 4, 7, and 8
E. Pins 4, 5, 7, and 8
Correct Answer: E QUESTION 3
You are a network administrator at Certkiller . Your newly appointed Certkiller trainee wants to know what
protocol IP Phone uses to learn the Voice VLAN ID it should use for Voice traffic.
What will your reply be?

A. Skinny Station Protocol
B. 802.1q
C. LLQ
D. VTP 350-030

E. CDP
Correct Answer: E QUESTION 4
You are the network administrator at Certkiller . Your newly appointed Certkiller trainee wants to know
what MailStore options are supported in Unity version 2.4.6.
What will your reply be?

A. MS Mail
B. Domino
C. Exchange 2000
D. Exchange 5.5
E. None of the above Correct Answer: D

QUESTION 5

You are a network administrator at Certkiller . Certkiller has a Unity3.0/ and Exchange 2000 system. Which of the following attributes will be stored in Active Directory? (Choose three.)
A. Transfer Type (Supervised, Release to switch)
B. Location ID
C. Alternate Extensions
D. Recorded Name
E. All of the above
Correct Answer: BCD QUESTION 6
You are a network administrator at Certkiller . Your newly appointed Certkiller trainee wants to know what
Network Management Server (NMS) application she can use to monitor Voice quality by polling the SNMP
MIB for MQC.
What will your reply be?

A. Voice Health Monitor
B. Quality of Service Policy Manager 350-030
C. Internetwork Performance Monitor
D. Resource Manager Essentials
E. None of the above

Correct Answer: C QUESTION 7
You are the network administrator at Certkiller . The Certkiller network and the complete MPLS router QoS configuration is shown in the following exhibit:

The LAN switches (and any other equipment in the cloud) do not mark or remark the packets.
With regard to the QoS configuration in the exhibit, when IP Phone A calls IP Phone B, how will the voice
and signalling packets be marked by the time they arrive at IP Phone B?

A. Voice: IP Precedence 5: Signaling 3
B. Voice: DSCP AF ; Signaling : DSCP EF31
C. Voice: IP Precedence 5; Signaling 3: 0
D. Voice: DSCP EF; Signaling : DSCP EF31
E. Voice: DSCP EF; Signaling : 0

Correct Answer: D
QUESTION 8
You are a network administrator at Certkiller . Your newly appointed Certkiller trainee wants to know what
protocol an IP Phone uses to learn the IP Address of its TFTP Server.
What will your reply be?

A. CDP
350-030

B. OSPF
C. HSRP
D. EIGRP
E. DHCP
Correct Answer: E
QUESTION 9
With regard to jitter, which of the following statements are true?
A. Jitter is the variation from the time that a packet is expected to be received and when it is actually received. Voice devices have to compensate for jitter by setting up a playout buffer to accept voice in a smooth fashion and avoid discontinuity in the voice stream.
B. Jitter is the actual delay from the time that a packet is expected to be transmitted and when it actually is transmitted. Voice devices have to compensate for jitter by setting up a playin buffer to play back voice in a smooth fashion and avoid discontinuity in the voice stream.
C. Jitter is the actual delay from the time that a packet is expected to be transmitted and when it actually is transmitted. Voice devices have to compensate for jitter by setting up a playout buffer to play back voice in a smooth fashion and avoid discontinuity in the voice stream.
D. Jitter is the variation from the time that a packet is expected to be received and when it is actually received. Voice devices have to compensate for jitter by setting up a playin buffer to accept voice in a smooth fashion and avoid discontinuity in the voice stream.
Correct Answer: A
QUESTION 10
You are a network administrator at Certkiller . Your newly appointed Certkiller trainee wants to know what
the differences between Type of Service (ToS) and Class of Service (CoS) are.
What will your reply be? (Choose two.)

A. CoS allows a class based access to the media, but ToS prioritizes this access according to the precedence bit.
B. CoS is a field in the IP header, but ToS is evaluated by the routing protocol.
C. CoS is a Layer 2 mechanism, but ToS is a Layer 3 mechanism.
Correct Answer: AC QUESTION 11

You are a network engineer at Certkiller . The Certkiller network is shown in the following exhibit:

You have just configured the Catalyst 6000 with the following commands:
set qos enable set port qos 5/1-48 vlan-based set port qos 5/1-48 trust-ext untrusted set port qos 5/1-48
trust trust-cos We assume that the IP Phone is connected to port 5/1, which of the following statements are
true? (Choose three.)

A. The IP Phone will re-write the CoS of 802.1p/Q-tagged packets form the PC to CoS=0.
B. The IP phone will not modify the DSCP of packets from the PC.
C. The Catalyst 6000 will not modify the CoS of any packets received on port 5/1.
D. The Catalyst 6000 switch port 5/1 will re-write the CoS of all packets received on VLAN 110 with CoS=5.
E. The Catalyst 6000 switch port 5/1 will re-write all packets with a Cos=0.
Correct Answer: ABC QUESTION 12
You are the network administrator at Certkiller . The Certkiller network is shown in the following exhibit:

The default gateway in the Certkiller network is a 6608 blade that is running MGCP.
Call Manager runs version 3.1. Certkiller users will make calls from Phone A to Phone X. All IP streaming
is G.711. Each of the logical links in the Certkiller network carries different types of traffic.
On which link can q.921 traffic be sent?

A. 1 only
B. 2 and 3
C. 2 and 4
D. 3 and 4
E. 4 only
Correct Answer: E QUESTION 13
You are a network administrator at Certkiller . Your newly appointed Certkiller trainee wants to know what
the term “MGCP backhaul” means.
What will your reply be?

A. Transporting T1 CAS messaging to the MGCP Call Agent across IP.
B. Transporting ISDN Q.931 messaging to the MGCP Call Agent across IP.
C. Transporting ISDN Q.921 messaging to the MGCP Call Agent across IP.
D. Transporting ISDN Q.931 messaging into MGCP events to the MGCP Call Agent.
E. Encapsulating ISDN Q.931 CDR records to a RADIUS server.
Correct Answer: B QUESTION 14
You are the network administrator at Certkiller . Certkiller has a CM network deployed with MGCP to the branch office GWs. The Certkiller network is shown in the following exhibit:

You want to protect the protect branch office telephony (IP phone to IP Phone, and IP Phone to PSTN) in
the event of a WAN failure.
Which design methods could you implement? (Choose two.)

A. SRST
B. MGCP gateway fallback
C. CM clustering
D. Primary and Secondary CMs

E. CAC
Correct Answer: AB QUESTION 15
You are the network administrator at Certkiller . The Certkiller network is shown in the following exhibit:

A Certkiller user at PhoneA has finished a call. He later notice that “CM Fallback Service Operating” is
displayed on Phone A.
What is the possible cause of this? (Choose two.)

A. The TCP connection between CallManager and PhoneA has been disrupted. 350-030
B. The FE on HQ-GW is out of service.
C. The FXO port on Remote-GW is out of service.
D. The FE on Remote-GW is out of service.
E. Remote-GW has not received any messages from CallManager within the timeout period.
Correct Answer: AB QUESTION 16
You are the network administrator at Certkiller . The Certkiller Voice network is shown in the following exhibit:

A. 1 only
B. 1 and 2 350-030
C. 1, 3, and 4
D. 2, and 3
E. 2, 3, and 4
Correct Answer: A QUESTION 17
On which of the following does the maximum device weight capacity a Cisco MCS server depend? (Choose three.)
A. The quantity and the type of phones configured on the Cisco MCS server.
B. CCM software release version.
C. The amount of memory, CPU and I/O throughput.
D. The server model and type.
Correct Answer: BCD QUESTION 18
You are the network administrator at Certkiller . The Certkiller WAN is shown in the following exhibit:

The remote Certkiller user at Analog Phone A tries to make a call to Analog Phone D. The call is rejected.
You troubleshoot the problem and discover that the ISDN Plan and Type that the PSTN was receiving was
not setup correctly. The PSTN was expecting the following:
Plan: Unknown Type: Unknown While the PSTN was receiving the following:
Plan:ISDN Type: Unknown Which methods will resolve this problem?

A. Use the isdn map command on the POST dialpeer on Remote-GW.
B. Use the isdn map command on the VOIP dialpeer on HQ-GW.
C. Use the isdn map command on the POTS dialpeer on HQ-GW.
D. Implement an outgoing translation rule on the VOIP dialpeer on HQ-GW.
E. Use the isdn map command on the VOIP dialpeer on Remote-GW.
350-030

Correct Answer: D
QUESTION 19
Migrating form TDM voice requirements to VoIP usually does not cause migration issues for customers who expect to be:
A. Deploying in a Green-Field scenario.
B. Fully IP in 1 to 3 years.
C. Fully IP within 12 months.
D. All of the above.
Correct Answer: A QUESTION 20
You are the network administrator at Certkiller . The Certkiller network is shown in the following exhibit:

You want to implement Caller ID for calls from PSTN to the IP Phones. Analog trunks are equipped to the
PSTN from both the GWs. The PSTN CO switch is capable of delivering Caller ID on the connection to the
Cisco voice GW. The Cisco voice gateway is using a VIC-2FXO-M1 card.
What would be the correct voice GW design?

A. None. Caller ID is not supported on analog FXO.
B. GW connected via SCCP to the CallManager.
C. GW must be a 2600/3600/3700 series platform.
D. GW connected via MGCP to the CallManager.
E. GW connected via H.323 to the CallManager.
350-030 Correct Answer: E QUESTION 21
You are a network administrator at Certkiller . Certkiller has recently joined a ISP that offers debit card calling from the US to other locations around the world where they only have FXO connectivity to the PSTN. The Certkiller network is shown in the following exhibit:

It is crucial to the ISP to ensure that their consumers are not charged for the call unless the call
successfully reached the called party in the PSTN.
Which of the following design requirements will achieve the ISP’s desired results?

A. Use Voice Activity Detection (VAD) to determine whether or not a person answered the call.
B. Use CDR records to determine which calls resulted in “ring no answer” and which calls were answered.
C. Configure call progress tone detection on the FXO interface to indicate disconnect supervision.
D. Avoid use of FXO for this application.
E. Configure call progress tone detection on the FXO interface to indicate answer supervision.

Correct Answer: E QUESTION 22
You are the network administrator at Certkiller . The Certkiller network is shown in the following exhibit:

You want Caller ID be displayed for all phones connected to the PBXs, as well as for calls going in both
directions across the IP network. The PBXs only have analog (FXS, FXO and E&M) capabilities to connect
to the Cisco voice GWs.
What design will satisfy this requirement?

A. All of FXS, FXO and E&M, provided that the FXO cards support Caller ID. 350-030
B. 2-wire and 4-wire E&M.
C. 4-wire E&M and FXO.
D. FXS and E&M only.
E. None with only analog capability.
Correct Answer: A QUESTION 23
Your newly appointed Certkiller trainee wants to know what type of signaling can provide automatic
Number Identifications (ANI) on a T1/E1 line.
What will your reply be? Select two.

A. E&M-fgd
B. Loop Start
C. PRI
D. E&M-fgb
Correct Answer: AC QUESTION 24
You are the network administrator at Certkiller . The Certkiller network is shown in the following exhibit:

The PBX does not receive the initial few digits from the IP side of the 2611 network. What should you do?
A. Configure prefix delay, in the dial-peer POTS to add the delay.
B. Configure interdigit timing 1 under the voice-port.
C. Configure prefix, in the dial-peer POTS to forward the necessary digits.
D. Configure delay-dial under the voice-port to add the delay.

Correct Answer: D
The Cisco contains more than 400 practice questions for the Cisco https://www.leads4pass.com/350-030.html exams,including simulation-based questions. Also contains hands-on exercises and a customized copy of the Cisco 350-030 exams network simulation software.